Tru-Glaze-WB 4408

Generic:

Waterborne Epoxy Polyamide General Description: A high performance, two-package, chemically-cured waterborne gloss epoxy coating for use as a hard, durable high performance architectural coating (HIPAC). Features easy application, low VOC, high flash point, lower odor than solvent-based epoxies, and a hard, tough, stain-resistant finish. May be used in areas subject to continuous high moisture such as shower rooms.

Typical Uses:

Use on interior properly prepared poured concrete, concrete block, drywall, metal and wood. Ideal for hard usage areas of schools, hospitals, restaurants, public buildings and
factories.

Advantages:

Chemical and stain resistant
Resists splash and spillage of alkalis, salts, moisture, oils, grease, foodstuffs and detergents
Abrasion resistant
Low odor and a high flash point
Use over alkyd, latex or epoxy coatings
Long lasting tile-like finish
Easily washed and cleaned
Low VOC
Performance alternate for Federal Specifications TT-C-535B (Type II) and TT-C-550C (Class A)

Limitations

Not recommended for immersion service. Exterior exposure will cause early dulling and loss of gloss, but does not affect protective properties. Epoxy coatings may yellow during application and cure if exposed to the combustion byproducts of improperly vented fossil fuel burning heaters.